Geophysical
   IT Products
 
Home > Modems
Modems

v.90 /92 modem.

v.90 /92 modem

The Pegasus II modem is a palm-sized v.90/92 modem good for those constantly on the go and need fast dial-up connection.

TTL modem.

TTL modem

The TTL level modem is a highly integrated, low cost, high performance, and low power dissipation modem module. This module implements v.90 to achieve Internet connection rates of up to 64kbps, supporting existing v.34 data mode, class 1 fax mode. The modem provides a TTL level serial interface for connecting to DTE terminal and connection rate ranging from 300 bps to up to 115200 bps.

Technical Document (523k byte / pdf format)

USB modem.

USB modem

Technical Document (3.04M byte / pdf format)

PC104 industrial modem.

PC104 industrial modem

IPC2(V)-5600 Modem Specification
Function Specification:
• Data modem
− ITU-T V.90 (56 kbps)
− V.34 (33.6 kbps)
− V.32 bis, V.32, V.22 bis, V.22, V.23, and V.21
− Bell 212A and 103
− V.42 LAPM, MNP 2-4, and MNP 10 error correction
− V.42 bis and MNP 5 data compression
− MNP 10EC™ enhanced cellular performance
• Fax modem send and receive rates up to 14.4 kbps
− V.17, V.29, V.27 ter, and V.21 channel 2
• V.80 synchronous access mode supports host-based communication protocols
• Voice/TAM/telephony extensions mode(voice Version)
− Handset support
− Full-duplex speakerphone mode
− ITU-T V.61 modulation (4.8 kbps data with audio)
• Communication software compatible AT command sets
• Built-in host/DTE interface with speeds up to 230.4 kbps
• PC/104 16bit Bus Interface
• Plug and Play supported (PnP Version)
• Work with Windows 95, 98, ME, NT 4.0 and Windows 2000 system
• Work with Linux system, WinCE, WinCE.net, etc. Power Consumption
− DC 5V 240mA
− DC 12V 20mA (for IPC2V-5600 with voice function)
− DC -12V 20mA (for IPC2V-5600 with voice function)
* Note: only 5V DC is needed for IPC2-5600.
Operating Temperature Range: 0 ~ 70o C
Storage Temperature Range: -15 ~ 85o C
Speaker Output Power
The IPC2V-5600 speaker Jack output voltage range from 20mV to 2V and driver current 40mA Max.
The Max power output is 80mW so you need a booster


Approvals : FCC, CTR21, UL, CE


 home | site map | about us | downloads | send email | live demo
© copyright of 3JTech Co., Ltd. (also doing business as A3J Engineering Inc.)
Jamey
My status
  
Larry
My status
  
Adrian
My status