Geophysical
   IT Products
 
Home> IP Camera and Video Gateways >using Broadband
using Broadband


IP Camera : eCAMit T

eCAMit T is an IP Camera with a CMOS image sensor. It is a stand alone camera with Internet accessibility using dynamic IP. Just connect it to the Ethernet port of the network switch or router.



IP Camera w/ PIR: peCAMit T

peCAMit T is an IP camera with a CMOS image sensor and a PIR (Passive Infrared Detector). It is a stand alone IP camera with Internet accessibility using dynamic IP.



Stackable Video Gateway(Video Server): veCAMit Tx1

veCAMit T x1 is a single channel video gateway (Video Server). It turns the CCTV camera into IP camera using dynamic IP with features similar to our T series IP cameras.



Stackable Video Gateway(Video Server): veCAMit Tx4

dynamic IP with features similar to our T series IP cameras. It provides 48 zone motion detection and external trigger in. When the camera is triggered, it will send e-mails with JPEG attachments to you.



360 degree Pan IP Camera: pan_eCAMit T

pan_eCAMit T is an IP Camera with a CMOS image sensor and 360 o rotating. It is a stand alone camera with Internet accessibility using dynamic IP. Just connect it to the Ethernet port of the network switch or router.



IP Camera: netCAMit

netCAMit is a color network camera with built-in Plug & Play function by 3JTech . Just plug netCAMit directly to a RJ45 Ethernet port of your router as well as install the software, and you will be able to view camera sites in real time from anywhere in the world.



netCAMit_CS

netCAMit_CS is a color network camera by 3JTech with built-in Plug & Play, Ethernet software stacks and protocols.



veCAMit II_PT_Dome

veCAMit II_PT_Dome is a Plug and Play IP Dome camera with Pan Tilt Scan and built-in video server. Just plug the camera to the router with the network cable, the user then can view the cameras via the Internet.



IP Camera Security Package - netCAMit Secuirty DIY Package

netCAMit is a color network camera with built-in Plug & Play function by 3JTech . Just plug netCAMit directly to a RJ45 Ethernet port of your router, install the software and you will be able to view camera sites in real-time from anywhere in the world.



 home | site map | about us | downloads | send email | live demo
© copyright of 3JTech Co., Ltd. (also doing business as A3J Engineering Inc.)
Jamey
My status
  
Larry
My status
  
Adrian
My status